Custom Fit Seat Covers for Cars, Trucks & SUV’s

I know how the dash comes out, i think (screws near the "hood" latch, 2 screws above the gauges, and then u pull the dash of the clip hooks).

With that said, wiring! Im mounting the amp to the box, and i will cut a hold where the trunk ends and the second row of seats starts, how do i get to the wire after i push it towards the floor. Someone said the black pieces that the door covers (door sill i think its called), come out when u give them a tug…is that how you acess the bottom of the truck (under the carpet)? From there im slicing the grommet and pushing the power wire through. RCA jacks is a different story, i have no idea how those will get to the headunit without taking out the headunit (which i have not installed yet) and pushing the wires into the back whil the headunit is out. Unless when i take off the dash there is a obvious place the RCA wires go.

As for the deck, someone said i need a antenna adapter to convert my old cables into my new decks recieving jacks?

First, buy the repair manual for your truck at the link below.

http://www.amazon.com/Durango-Dakota-Pick-ups-2000-2003-Repair/dp/B0009WMRAA/sr=8-3/qid=1170886274/ref=sr_1_3/102-4759163-0364943?ie=UTF8&s=automotive

Then go buy your local library and check out as many books as you can find on mobile audio.

Once you have read all you can stand, and understand all you can read, take another, more educated look at your install.

I only say this because the description of how you plan to go about what you need to do will probably have you calling someone to so it for you, or calling the fire department to put your truck out.

Also visit www.carstereohelp.com and purchase the instructions available to get to your head unit and speakers. Right now, you’re bound to break something and neither of us wants that.